Garrett MT 5500 Walk Through Metal Detector || Best Metal Detector Technology

Garrett MT 5500 Walk Through Metal Detector

Garrett MT 5500 Walk Through Metal Detector Technical Specifications:

• Warranty : 2 Years Limited
• Humidity to 95% Non-Condensing
• Storage Temperature : -40° F (-40° C) to 158° F (70° C)
• Operating Temperature : -4° F (-20° C) to +122° F (50° C)
• Traffic Counter : Built-In and Re-settable with Current Reading Available on LCD Panel
• Masking : Programs Designed to Eliminate the Problem of Dissimilar Targets Canceling Each Other
• Control Outputs : Solid State Switches (low voltage AC or DC) for Operating External Alarms and Control Devices
• Power : Fully Automatic 100 to 240 VAC, 50 or 60 Hertz, 24 watts; No Rewiring, Switching or Adjustments Needed
• Weatherproofing / Foreign Object Protection Standards : Meets IP 31, IEC Standard. “Degrees of Protection provided by Enclosures,” IEC 529
• Synchronization : Multiple Channels Permit Several MT 5500s and other Garrett Detectors to Operate Simultaneously in Close Proximity
• Construction : Attractive Scratch and Mar-Resistant Laminate with Resilient End Caps; Control Panel and Cross Members Made of Heavy Duty Aluminum
• Infrared Sensor : Improves Analysis of Detection Signal; Increases Throughput; Helps Eliminate “False Alarms” and also Provides Accurate Traffic Counter
• Interference Suppression : 100% Sensor Coil Faraday Shielding; RFI Interference Reduced with Hardware; Special Garrett Built-In Circuitry for Noise Suppression and Ignoring X-Ray Monitors. Physical Interference Minimized by Coil Design and Circuitry
• Alarms : Ready Light Indicates Unit is Operational; Alarm Lights and Audible Alarms are Activated when the Target Amount of Metal is Detected; Location of Alarm Lights on Left and Right Side of Display Combined with Variable Tone Indicates which Side of the Person the Target is Located
• Tamper-Proof : Dual-Level Access Codes Required to Set or Change All Sensitivity Settings and Detection Programs; One Level for Use by Supervisors in Selecting Programs and Sensitivity and the other for Initial Set-Up and Overall Control; Non-Re-settable Sequence Code Logs All Changes Made Whenever Sensitivity Codes are Accessed. An Audible Alarm Reports Unauthorized Attempts at Access

Garrett MT 5500 Walk Through Metal Detector Features:

• Three Levels of Ankle Boost Sensitivity
• Multiple Coil Design to Minimize False Alarms
• Uniform Detection Field Eliminates “Hot Spots”
• Self Diagnostic Program : Complete and Automatic
• 20 Standard Programs for Security Application Versatility
• Optional Battery Pack for Use Anywhere; Provides up to 20 Hours of Backup
• Rugged, Lightweight Design Provides Simple Maintenance and Easy Portability
• Microprocessor Technology in Detection and Control Circuitry. Maximum of 200 Distinct Sensitivity Levels
• Easy Assembly : Designed with Only Four (4) Pieces and Eight (8) Screws. Simple-to-Follow Instructions
• Multi-Dimensional Scanning Indicates whether a Metal Target is Located on the Left, Right or Center of the Archway
• Overhead Control Unit : LCD, Alarm Light, LED Bar Graph and Control Touch-pads—Plus All Wiring, Connections and Electronics—are Integrated into a Single External Overhead Control Box Compartment to Eliminate Wire Exposure

Watch Garrett MT 5500 walk through metal detector video here